Edge banding adhesive type used by edge banders is

• A. epoxy resin
• B. hot melt
• C. contact cement
• D. white glue

Answer: (B)

Edge banding needs an adhesive that bonds instantly as the tape is pressed onto the edge, so production can keep moving without waiting for long cures. Hot-melt adhesives melt in a glue pot on the edge bander and flow onto the edge as the tape is pressed, then cool quickly to form a strong, immediate bond. This fast setup is essential for continuous operation and helps prevent lifting during trimming and finishing. Other types, like epoxy resin, take much longer to cure and are overkill for a continuous edge-banding process, while white glue (PVA) is moisture-sensitive and slower to set, which isn’t practical on a fast-moving machine. Contact cement requires applying and drying on both surfaces before joining, which disrupts the continuous workflow. So hot melt is the practical, efficient choice for edge banding.